Lantronix XPress-DR-IAP XPress-DR / XPress-DR-IAP - User Guide - Page 40

Test the IP Address, Enter IP Address to assign, Set IP Address

Get Lantronix XPress-DR-IAP PDF manuals and user guides View all Lantronix XPress-DR-IAP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Getting Started 3. In the Enter IP Address to assign field, enter the unit's IP address in XXX.XXX.XXX.XXX format. 4. In the PC Network Class section, select the class (subnet mask). (Most users select Class C). 5. Click the Set IP Address button. (IP is assigned, pinged, and tested) 6. Confirm that the "Assign IP successful" message displays and click OK. 7. Click the Back button to return to the DeviceInstaller window. 2.4.3 Test the IP Address 1. Click the Ping icon . The Ping Device window displays. Figure 9 - Ping Device Window 2. Confirm that "Reply received" messages display in the window, indicating that the IP address has been entered successfully. Note: If you do not receive "Reply received" messages, make sure the unit is properly attached to the network and that the IP address assigned is valid for the particular network segment you are working with. If you are not sure, check with your systems administrator. 3. Click the Back button to return to the Device Installer window. 2-8 DSTni-XPress DR User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
Getting Started
3. In the
Enter IP Address to assign
field, enter the unit°s IP address in
XXX.XXX.XXX.XXX format.
4.
In the PC Network Class section, select the class (subnet mask). (Most users select Class
C).
5. Click the
Set IP Address
button. (IP is assigned, pinged, and tested)
6.
Confirm that the ²Assign IP successful³ message displays and click OK.
7. Click the
Back
button to return to the DeviceInstaller window.
2.4.3 Test the IP Address
1. Click the
Ping
icon
. The Ping Device window displays.
Figure 9 - Ping Device Window
2.
Confirm that ²Reply received³ messages display in the window, indicating that the IP
address has been entered successfully.
Note:
If you do not receive “Reply received” messages, make sure the unit is properly
attached to the network and that the IP address assigned is valid for the particular network
segment you are working with. If you are not sure, check with your systems administrator.
3.
Click the Back button to return to the Device Installer window.
2-8
DSTni-XPress DR User Guide