Lenovo ThinkStation D20 Hardware Maintenance Manual - Page 75
Mouse Port interface Test Passed, Mouse Port interface Device controller
View all Lenovo ThinkStation D20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Diagnostic Error Code 080-197-XXX Game Port interface test warning 080-198-XXX Game Port interface test aborted 080-199-XXX Game Port interface test failed, cause unknown 086-000-XXX Mouse Port interface Test Passed 086-001-XXX Mouse Port interface Presence 086-032-XXX Mouse Port interface Device controller failure 086-035-XXX Mouse Port interface Reset 086-040-XXX Mouse Port interface IRQ failure 086-195-XXX Mouse Port interface Test aborted by user 086-196-XXX Mouse Port interface test halt, error threshold exceeded 086-197-XXX Mouse Port interface test warning 086-198-XXX Mouse Port interface test aborted FRU/Action 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 41 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 41 2. Flash the system and re-test. See "Flash update procedures" on page 251 3. Go to "Undetermined problems" on page 75 1. See "Undetermined problems" on page 75 2. Flash the system and re-test. See "Flash update procedures" on page 251 3. Replace component under function test No action 1. Mouse 2. System board 1. Mouse 2. System board 1. Mouse 2. System board 1. Run Setup 2. Mouse 3. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 41 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6 "Using the Setup Utility" on page 41 2. Flash the system and re-test. See "Flash update procedures" on page 251 3. Go to "Undetermined problems" on page 75 Chapter 9. Symptom-to-FRU Index 67