Lenovo ThinkStation D20 Hardware Maintenance Manual - Page 91

Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no servicable parts inside these components. Attention Do not open your computer or attempt any repair before reading and understanding the "Important safety information" in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support. This section provides information on how to remove or replace the power supply. To replace the power supply, do the following: 1. Remove the computer cover and then lay the computer on its side. See "Removing the cover" on page 78. 2. Locate the power supply assembly. See "Locations" on page 79. 3. Disconnect the power supply cables from the system board connectors. Disconnect the power supply cables from all adapter cards (some models) and from all drives. 4. Remove the power supply cables from the cable clips and ties. 5. Remove the five screws at the rear of the chassis that secure the power supply. 6. Depress the power supply latch 1 . Slide the power supply assembly toward the front of the computer and remove it from the chassis. Chapter 10. Replacing FRUs (Type 4105, 4157, 4217) 83