Lexmark E352DN User's Guide - Page 13

Understanding print media guidelines, Selecting paper, Selecting preprinted forms and letterhead - software

Get Lexmark E352DN - E 352dn B/W Laser Printer PDF manuals and user guides View all Lexmark E352DN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Understanding print media guidelines Selecting paper Proper paper loading helps prevent jams and ensures trouble-free printing. To help avoid jams or poor print quality: • Always use new, undamaged paper. • Flex the paper stack back and forth. Do not fold or crease the paper. Straighten the edges on a level surface. • Before loading paper, know the recommended print side of the paper. This information is usually indicated on the paper package. • Make sure the paper stack is laying flat in the tray and is not above the maximum paper fill indicators. Improper loading may cause jams. • Do not use paper that has been cut or trimmed by hand. • Do not mix media sizes, weights, or types in the same source; mixing results in jams. • Do not use coated papers unless they are specifically designed for electrophotographic printing. • Do not remove trays while a job is printing or Busy appears on the display. • Make sure the Paper Type, Paper Texture, and Paper Weight settings are correct. (For more information about these settings, see "Paper Menu" in the Menus and Messages Guide located on the Software and Documentation CD.) • Make sure the paper is properly loaded in the source. Selecting preprinted forms and letterhead Use the following guidelines when selecting preprinted forms and letterhead paper for the printer: • Use grain long papers for best results for 60 to 90 g/m2 weights. • Use only forms and letterhead printed using an offset lithographic or engraved printing process. • Avoid papers with rough or heavily textured surfaces. Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand temperatures of 210°C (410°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks that are oxidation-set or oil-based should meet these requirements; latex inks might not. When in doubt, contact the paper supplier. Preprinted papers such as letterhead must be able to withstand temperatures up to 210°C (410°F) without melting or releasing hazardous emissions. Selecting print media 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Selecting print media
13
Understanding print media guidelines
Selecting paper
Proper paper loading helps prevent jams and ensures trouble-free printing.
To help avoid jams or poor print quality:
•
Always
use new, undamaged paper.
•
Flex the paper stack back and forth. Do not fold or crease the paper. Straighten the edges on a level surface.
•
Before loading paper, know the recommended print side of the paper. This information is usually indicated on the
paper package.
•
Make sure the paper stack is laying flat in the tray and is not above the maximum paper fill indicators. Improper
loading may cause jams.
•
Do not
use paper that has been cut or trimmed by hand.
•
Do not
mix media sizes, weights, or types in the same source; mixing results in jams.
•
Do not
use coated papers unless they are specifically designed for electrophotographic printing.
•
Do not
remove trays while a job is printing or
Busy
appears on the display.
•
Make sure the Paper Type, Paper Texture, and Paper Weight settings are correct. (For more information about
these settings, see “Paper Menu” in the
Menus and Messages Guide
located on the
Software and Documentation
CD.)
•
Make sure the paper is properly loaded in the source.
Selecting preprinted forms and letterhead
Use the following guidelines when selecting preprinted forms and letterhead paper for the printer:
•
Use grain long papers for best results for 60 to 90 g/m
2
weights.
•
Use only forms and letterhead printed using an offset lithographic or engraved printing process.
•
Avoid papers with rough or heavily textured surfaces.
Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand temperatures
of 210°C (410°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks
that are oxidation-set or oil-based should meet these requirements; latex inks might not. When in doubt, contact the paper
supplier.
Preprinted papers such as letterhead must be able to withstand temperatures up to 210°C (410°F) without melting or
releasing hazardous emissions.