Lexmark E352DN User's Guide - Page 41
Printing the menu settings on Warnings - reset photoconductor
View all Lexmark E352DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Maintaining the printer 5 Install the toner cartridge into the new print cartridge assembly by aligning the white rollers on the toner cartridge with the white arrows on the tracks of the photoconductor and pushing the toner cartridge in as far as it will go. The cartridge clicks into place when correctly installed. 6 Install the print cartridge assembly into the printer by aligning the green arrows on the guides of the print cartridge assembly with the green arrows on the tracks in the printer and pushing the print cartridge assembly in as far as it will go. 7 Close the front door. 8 Turn the printer back on. 9 Reset the photoconductor counter (see the instruction sheet that shipped with the new photoconductor kit). Note: Print your printer menu settings pages. For more information, see Printing the menu settings page on page26. If Photoconductor is listed under Warnings, the photoconductor counter has not been properly reset. Photoconductor kit end-of-life 41