Lexmark MX432 Users Guide - Page 102
Media Configuration, Universal Setup
![]() |
View all Lexmark MX432 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Use printer menus 102 Menu item Description Substitute Size Off Letter/A4 All Listed* Set the printer to substitute a specified paper size if the requested size is not loaded in any paper source. Notes: • Off prompts the user to load the required paper size. • All Listed allows all available substitutions. Configure MP Cassette* Manual First Determine the behavior of the multipurpose feeder. Notes: • Cassette configures the multipurpose feeder as the automatic paper source. • Manual sets the multipurpose feeder only for manual-feed print jobs. • First configures the multipurpose feeder as the primary paper source. Note: An asterisk (*) next to a value indicates the factory default setting. Media Configuration Universal Setup Menu item Description Units of Measure Inches Millimeters Specify the unit of measurement for the universal paper. Note: Inches is the U.S. factory default setting. Millimeters is the international factory default setting. Portrait Width 3.90-14.17 inches (8.50*) 99-360 mm (216*) Set the portrait width of the universal paper. Portrait Height 3.90-14.17 inches (14*) 99-360 mm (356*) Set the portrait height of the universal paper. Feed Direction Short Edge* Long Edge Set the printer to pick paper from the short edge or long edge direction. Note: Long Edge appears only when the longest edge is shorter than the maximum width supported. Note: An asterisk (*) next to a value indicates the factory default setting.
![](/manual_guide/products/lexmark-mx432-users-guide-ae63427/102.png)