Lexmark MX432 Users Guide - Page 191
Step 1, Settings, Print, Quality, Toner, Darkness, Notes, Paper, Tray Configuration, Paper Size/Type
View all Lexmark MX432 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Troubleshoot a problem 191 Action Yes Step 1 Go to step 2. a Check if the printer is using a genuine and supported Lexmark toner cartridge. Note: If the cartridge is not supported, then install a supported one. b Print the document. Is the print light? Step 2 Go to step 3. a Turn off the printer, wait for about 10 seconds, and then turn on the printer. b Increase toner darkness. From the home screen, touch Settings > Print > Quality > Toner Darkness. c Print the document. Is the print light? Step 3 Go to step 4. a Depending on your operating system, specify the paper type from the Printing Preferences or Print dialog. Notes: • Make sure that the setting matches the paper loaded. • You can also change the setting on the printer control panel. From the home screen, touch Settings > Paper > Tray Configuration > Paper Size/Type. b Print the document. Is the print light? Step 4 a Depending on your operating system, specify the print resolution from the Printing Preferences or Print dialog. b Set the resolution to 600 dpi. c Print the document. Go to step 5. Is the print light? No The problem is solved. The problem is solved. The problem is solved. The problem is solved.