Lexmark MX432 Users Guide - Page 183

Troubleshoot a problem Error codes 71.01 71.02 71.03 71.06 71.12 71.13 72.01 84.00, 84.01, 84.02, 84.09 84.11, 84.12, 84.13, 84.19 84.21, 84.22, 84.23, 84.29 84.31, 84.32, 84.33 84.41, 84.42, 84.43 88.00, 88.09 88.10, 88.19 88.20, 88.29 88.40, 88.48 183 Error message Solution Fax Station Name not set up. Contact system administrator. See "Setting up the fax function using analog fax" on page 29. Fax Station Number not set up. Contact system administrator. No analog phone line connected to modem, fax is disabled. Check the connection and the line for a signal. For more information, see "Setting up fax using a standard telephone line" on page 32. Unable to connect to HTTPS Connection to HTTPS Fax Server is Fax Server. disconnected. Check the Internet connection of the printer. Memory full, cannot print Touch Print All to print as many of the faxes. faxes as have been saved. Memory full. Cannot send faxes. Try one or more of the following: • Continue and try sending the fax again. • Scan the original document one page at a time, dial the fax number, and then scan the document. E-mail SMTP server not set up. Contact system administrator. Try either of the following: • Set up your e‑mail function. For more information, see "Configuring the e‑mail SMTP settings" on page 37. • Disable the error message. For more information, see "Disabling the 'SMTP server not set up' error message" on page 236. Imaging unit nearly low. Imaging unit low. Touch Continue to clear the message. Imaging unit very low. Replace imaging unit, See "Replacing the imaging unit" on recommended life exceeded. page 160. Replace imaging unit to continue printing. Cartridge nearly low. Cartridge low. Touch Continue to clear the message. Cartridge very low. Replace cartridge, 0 pages See "Replacing the toner cartridge" remain. on page 158.