Lexmark MX432 Users Guide - Page 134
WPA2-Personal, 1x Encryption Mode, Network Address, PCL SmartSwitch, Manually Assigned IPv6 Address
View all Lexmark MX432 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Use printer menus 134 Menu item WPA2-Personal AES 802.1x Encryption Mode WPA+ WPA2* IPv4 Enable DHCP On* Off Set Static IP Address IP Address Netmask Gateway IPv6 Enable IPv6 On* Off Enable DHCPv6 On Off* Stateless Address Autoconfiguration On* Off DNS Server Address Manually Assigned IPv6 Address Manually Assigned IPv6 Router Address Prefix All IPv6 Addresses All IPv6 Router Addresses Network Address UAA LAA PCL SmartSwitch Off On* PS SmartSwitch Off On* Description Enable Wi‑Fi security through WPA2. Note: This menu item appears only when the Wireless Security Mode is set to WPA2-Personal. Enable Wi‑Fi security through 802.1x standard. Note: This menu item appears only when the Wireless Security Mode is set to 802.1x - RADIUS. Enable and configure IPv4 settings in the printer. Enable and configure IPv6 settings in the printer. View the network addresses. Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language. Note: If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language. Note: If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu.