Lexmark MX432 Users Guide - Page 29

Set up, install, and configure 29 Adjusting the default internal speaker volume 1 From the home screen, touch . 2 Adjust the volume. Notes: • If Quiet Mode is enabled, then audible alerts are turned off. This setting also slows the printer performance. • The volume resets to the default value after the user exits Accessibility mode or when the printer wakes from Sleep or Hibernate mode. Enabling spoken passwords or personal identification numbers 1 From the home screen, touch Settings > Device > Accessibility > Speak Passwords/PINs. 2 Enable the setting. Setting up the printer to fax Supported fax Printer model MX432adwe Analog fax etherFAX1 Fax server Fax over IP (FoIP)2 XM3142 1 Needs a subscription. For more information, go to https://www.etherfax.net/lexmark or contact the place where you purchased the printer. 2 Needs an installed license bundle. For more information, contact the place where you purchased the printer. Setting up the fax function using analog fax Notes: • Some connection methods are applicable only in some countries or regions. • If the fax function is enabled and not fully set up, then the indicator light may blink red. • If you do not have a TCP/IP environment, then use the control panel to set up fax. Warning-Potential Damage: To avoid loss of data or printer malfunction, do not touch cables or the printer in the area shown while actively sending or receiving a fax.