Lexmark MX432 Users Guide - Page 31
Setting up the fax function using fax server, Notes, Settings, Fax Setup, General Fax Settings
View all Lexmark MX432 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Set up, install, and configure 31 Notes: • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Settings > Fax > Fax Setup > General Fax Settings. Note: Fax Setup appears only if Fax Mode is set to Fax. 3 In the Fax Name field, type a unique name. 4 In the Fax Number field, enter the fax number that etherFAX provided. 5 From the Fax Transport menu, select etherFAX. 6 Apply the changes. Setting up the fax function using fax server Notes: • This feature lets you send fax messages to a fax service provider that supports e‑mail receiving. • This feature supports outgoing fax messages only. To support fax receive, make sure that you have a device‑based fax, such as analog fax, etherFAX, or Fax over IP (FoIP), configured in your printer. 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Settings > Fax. 3 From the Fax Mode menu, select Fax Server, and then click Save. 4 Click Fax Server Setup. 5 In the To Format field, type [#]@myfax.com, where [#] is the fax number and myfax.com is the fax provider domain. Notes: • If necessary, configure the Reply Address, Subject, or Message fields. • To let the printer receive fax messages, enable the device‑based fax receive setting. Make sure that you have a device‑based fax configured. 6 Click Save. 7 Click Fax Server E‑mail Settings, and then do either of the following: • Enable Use E‑mail SMTP Server. Note: If the E‑mail SMTP settings are not configured, then see "Configuring the e‑mail SMTP settings" on page 37. • Configure the SMTP settings. For more information, contact your e‑mail service provider. 8 Apply the changes.