Lexmark MX432 Users Guide - Page 127
Scan Edge to Edge, Text/Photo Default
View all Lexmark MX432 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Use printer menus 127 Menu item Description Auto Color Detect Configure the auto color detection setting. Color Sensitivity (5*) Area Sensitivity (5*) FTP Bit Depth (1 bit*) Minimum Scan Resolution (300 dpi*) Contrast Best for Content* 0 1 2 3 4 5 Specify the contrast for the scanned image. Background Removal Level (0*) Remove the background color or image noise from the original document. Scan Edge to Edge Off* On Allow edge‑to‑edge scanning of the original document. Note: An asterisk (*) next to a value indicates the factory default setting. Admin Controls Menu item Description Text Default 5-95 (75*) Set the quality of text on the scanned image. Text/Photo Default 5-95 (75*) Set the quality of text and photo on the scanned image. Photo Default 5-95 (50*) Set the quality of photo on the scanned image. Transmission Log Print Log* Do Not Print Log Print Only For Error Print a transmission log for FTP scans. Log Paper Source Tray [x] (1*) Multipurpose Feeder Specify the paper source for printing FTP logs. Custom Job Scanning Off* On Set the printer to scan the first set of original documents using the specified settings, and then scan the next set with the same or different settings. Note: This menu item appears only when an ISD is installed. Note: An asterisk (*) next to a value indicates the factory default setting.