Lexmark MX432 Users Guide - Page 92
Fax Configuration, Device Operations, Clear Custom Status
![]() |
View all Lexmark MX432 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Use printer menus 92 Menu item Description Fax Configuration Fax Storage Location NAND Disk* Set the storage location for all faxes. Note: This menu item appears only when an ISD is installed. Print Configuration Font Sharpening 0-150 (24*) Set a text point-size value below which the high‑frequency screens are used when printing font data. For example, if the value is 24, then all fonts sized 24 points or less use the high‑frequency screens. Print Configuration Print Density Disabled 1-5 (3*) Adjust the toner density when printing documents. Print Configuration Copy Density Disabled 1-5 (3*) Adjust the toner density when copying documents. Device Operations Quiet Mode Off* On Set the printer to operate in Quiet Mode. Note: Enabling this setting slows down the overall performance of the printer. Device Operations Panel Menus Off On* Enable access to the printer menus from the control panel. Device Operations Safe Mode Off* On Set the printer to operate in a special mode, in which it attempts to continue offering as much functionality as possible, despite known issues. For example, when set to On, and the duplex motor is nonfunctional, the printer performs one‑sided printing of the documents even if the job is two‑sided printing. Device Operations Minimum Copy Memory 20 MB* 30 MB 50 MB 80 MB 100 MB Set the minimum memory allocation for storing copy jobs. Device Operations Clear Custom Status Erase user‑defined strings for the Default or Alternate custom messages. Device Operations Clear all remotely‑installed messages Erase messages that were remotely installed. Note: An asterisk (*) next to a value indicates the factory default setting.
![](/manual_guide/products/lexmark-mx432-users-guide-ae63427/92.png)