Lexmark MX432 Users Guide - Page 139
SNMP, This menu appears only in network printers or printers that are attached to print servers.
![]() |
View all Lexmark MX432 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Use printer menus 139 Menu item Description Restricted Server List Options Specify the access option for IP addresses that are not in the list. Block All Ports* Block Printing Only Block Printing and HTTP Only MTU Specify a maximum transmission unit (MTU) parameter for the TCP connections. 256-1500 Ethernet (1500*) Raw Print Port 1-65535 (9100*) Specify a raw port number for printers connected on a network. Outbound Traffic Maximum Speed Off* On Set the maximum transfer rate of the printer. Note: When enabled, the option for this setting is 100-1000000 Kilobits/second. TLS Support Enable TLSv1.0 (Off) Enable TLSv1.1 (Off*) Enable TLSv1.2 (On*) Enable the Transport Layer Security protocol. SSL Cipher List Specify the cipher algorithms to use for the SSL or the TLS connections. Note: An asterisk (*) next to a value indicates the factory default setting. SNMP Note: This menu appears only in network printers or printers that are attached to print servers. Menu item Description SNMP Versions 1 and 2c Enabled Off On* Allow SNMP Set Off On* Enable PPM MIB Off On* SNMP Community Configure Simple Network Management Protocol (SNMP) versions 1 and 2c to install print drivers and applications. Note: An asterisk (*) next to a value indicates the factory default setting.
![](/manual_guide/products/lexmark-mx432-users-guide-ae63427/139.png)