Lexmark MX432 Users Guide - Page 107
Enable Line In Wrong Jack, Enable Extension in Use
View all Lexmark MX432 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Use printer menus 107 Menu item Description Memory Use All receive Mostly receive Equal* Mostly send All send Set the amount of internal printer memory allocated for faxing. Note: This menu item prevents memory buffer conditions and failed faxes. Cancel Faxes Allow* Don't Allow Cancel outgoing or incoming faxes. Fax Number Masking Off* From Left From Right Specify the format for masking an outgoing fax number. Digits to Mask 0-58 (0*) Specify the number of digits to mask in an outgoing fax number. Enable Line Connected Detection Off On* Determine whether a telephone line is connected to the printer. Note: Events are detected immediately. Enable Line In Wrong Jack Detection Off On* Determine whether a telephone line is connected to the correct port on the printer. Note: Events are detected immediately. Enable Extension in Use Support Off On* Determine whether a telephone line is used by another device, such as another phone on the same line. Note: Events are detected immediately. Optimize Fax Compatibility Configure the printer fax functionality for optimal compatibility with other fax machines. Fax Transport T.38 Analog G.711 etherFAX Set the fax transport method. Note: This menu item appears only if an etherFAX or Fax over IP (FoIP) license bundle is installed in the printer. Note: An asterisk (*) next to a value indicates the factory default setting. HTTPS Fax Settings Note: This menu appears only if Fax Transport is set to etherFAX. Menu item Description HTTPS service URL Specify the etherFAX service URL. Note: An asterisk (*) next to a value indicates the factory default setting.