Home » Lexmark Manuals » Multifunction Devices » Lexmark Network Printer Device » Manual Viewer

Lexmark Network Printer Device Getting Started - Page 17

Step10: Con your network printer, Inkjet printers, Con your network, printer

View all Lexmark Network Printer Device manuals

Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Step 10: Configure your network printer Follow the instructions for your printer type. Printer type Inkjet printers Laser printers Page 12 17 Inkjet 1 (software not previously installed) 1 Insert the printer software CD. Inkjet printers Use the printer software to help configure your network inkjet printer. If you have not already installed this software, locate the CD that came with your printer now. Choose a procedure from the following table to install your printer software and configure your network printer. If you have questions about the software screens and messages that appear during installation, see "Troubleshooting" on page 24. Procedure Inkjet 1 Inkjet 2 Printer software previously installed? No Yes Page 12 14 2 When the Lexmark printer software installation screen appears, click Install Now. Setup 12

Section	Page
Introduction	6
Setup	6
Step1: Select a location for your printer adapter	7
Step2: Unpack your printer adapter	7
Step3: Prepare your printer	8
Step4: Raise the printer adapter antenna	9
Step5: Connect your printer adapter to your printer	9
Step6: Connect your printer adapter power supply	10
Step7: Make sure all indicator lights are on	10
Step8: Turn on your computer	11
Step9: Set up your printer adapter on the network	11
Step10: Configure your network printer	17
Inkjet printers	17
Laser printers	22
Troubleshooting	29
An indicator light is not on	29
The Lexmark Printer Adapter Installation Software screen does not appear	30
I cannot find the network settings of my computer’s wireless adapter	30
My MAC address is not listed on the Select your N5 Wireless Adapter screen	31
My network is not listed on the Connect to the network (automatic) screen	31
I do not know the hexadecimal format of my WEP key	32
Setup was not successful (My printer was not found on the network)	32
The Lexmark printer software installation screen does not appear	33
An error message appears	33
My network printer does not appear in the list of available printers	33
There is not a Network button on the Results: No Printer Attached screen	34
There is not an Install Selected Printer button on the Network Configuration screen	34
My network printer does not print	35
How Do I...?	36
Change the computer’s network settings	36
Change the printer adapter network settings	37
Print a test page	38
Uninstall the printer software	38
Uninstall the Lexmark Printer Adapter Installation Software	39
Manually configure the network printer	39
Inkjet printers	39
Laser printers	40
Select the network printer port	41
Check the printer status	42
Specify a fixed IP address	42
Reset the printer adapter	43
Contact Lexmark	43