Lexmark Pro4000c User's Guide - Page 62
Scanning, Tips for scanning, Scanning to a local computer, Computer, Connected Computer
View all Lexmark Pro4000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Scanning Scanning ADF 62 Scanner glass Address Boko Dial Toen Pause Redial SD/MS/xD/MMC Use the ADF for multiple‑page documents. Note: The ADF is available only in select models. If you purchased a printer without an ADF, then load original documents or photos on the scanner glass. Address Boko Dial Toen Pause Redial SD/MS/xD/MMC Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Tips for scanning • Use the ADF when scanning two‑sided pages if your printer supports duplex scanning and the ADF supports the original document size. • Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning or the ADF does not support the original document size. • When using the ADF, adjust the paper guides on the ADF to the width of the original document. • To easily retrieve a document after copying or scanning, lift the ADF input tray. • When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image. • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. • When the document to be scanned is in place with the settings you want, press to start scanning. Scanning to a local computer 1 Load the original document faceup into the ADF or facedown on the scanner glass. 2 From the printer control panel, navigate to: > Scan > OK > Computer > USB‑Connected Computer > OK The USB‑connected computer will receive the scan by default. Note: Make sure the scan software is installed on the destination computer.