Lexmark X644E Menus and Messages Guide - Page 104

Standard USB port, Too many disks

Get Lexmark X644E - With Modem Taa/gov PDF manuals and user guides
UPC - 734646093156
View all Lexmark X644E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 104 highlights

Understanding MFP messages Message Meaning Action 54 Serial option [x] error The MFP detects a serial error, such as framing, parity, or overrun on the specified optional serial port. x is the number of the optional serial port. • Make sure the serial link is set up correctly, and the appropriate cable is in use. • Make sure the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer and host computer. • Touch Continue to clear the message and continue processing the print job; however the print job may not print correctly. • Turn the MFP off and then on to reset it. 54 Standard network software error The MFP firmware detects an installed network port, but cannot establish communication with it. • Touch Continue to clear the message and continue printing. The job may not print correctly. • The MFP disables attempts to communicate through the network interface. No data may be sent or received. • Reset the MFP. • Program new firmware for the network interface. 55 Unsupported option in slot [x] The MFP detects an unsupported option in the specified slot. x indicates the number of the specified slot. 1 Turn the MFP off. 2 Unplug the power cord from the wall outlet. 3 Remove the unsupported option. 4 Connect the power cord to a properly grounded outlet. 5 Turn the MFP on. 56 Parallel port [x] disabled A status request occurs over the parallel port, but the parallel port is disabled. Touch Continue. The MFP discards any data received on the parallel port. Touch Reset Active Bin to reset the active bin for a linked set of bins. 56 Serial port [x] disabled The MFP receives data across a serial port, but the port is disabled. Touch Continue. The MFP discards any data received on the serial port. Touch Reset Active Bin to change to another linked bin. 56 Standard USB port disabled The MFP receives data through a USB port, but the USB port is disabled. Touch Continue. The printer discards any data received through the USB port. Make sure the USB Buffer menu item is not set to Disabled. Touch Reset Active Bin to change to another linked bin. 56 USB port [x] disabled The MFP receives data through a specified USB port, but this USB port is disabled. x is the number of the USB port. Touch Continue. The MFP discards any data received through the specified USB port. Make sure the USB Buffer menu item is not set to Disabled. Touch Reset Active Bin to change to another linked bin. 57 Configuration change, The MFP fails to restore held jobs due Some held jobs are not restored. They stay on some held jobs were lost to configuration changes. The the hard disk and are inaccessible. message appears once. 58 Too many disks installed The MFP detects an excess of hard disks installed. 1 Turn the MFP off. 2 Unplug the power cord from the wall outlet. 3 Remove the excess hard disks. 4 Connect the power cord to a properly grounded outlet. 5 Turn the MFP on. Attendance messages 104

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Attendance messages
104
Understanding MFP messages
54 Serial option [x]
error
The MFP detects a serial error, such
as framing, parity, or overrun on the
specified optional serial port. x is the
number of the optional serial port.
•
Make sure the serial link is set up correctly,
and the appropriate cable is in use.
•
Make sure the serial interface parameters
(protocol, baud, parity, and data bits) are set
correctly on the printer and host computer.
•
Touch
Continue
to clear the message and
continue processing the print job; however
the print job may not print correctly.
•
Turn the MFP off and then on to reset it.
54 Standard network
software error
The MFP firmware detects an
installed network port, but cannot
establish communication with it.
•
Touch
Continue
to clear the message and
continue printing. The job may not print
correctly.
•
The MFP disables attempts to communicate
through the network interface. No data may
be sent or received.
•
Reset the MFP.
•
Program new firmware for the network
interface.
55 Unsupported option in
slot [x]
The MFP detects an unsupported
option in the specified slot. x indicates
the number of the specified slot.
1
Turn the MFP off.
2
Unplug the power cord from the wall outlet.
3
Remove the unsupported option.
4
Connect the power cord to a properly
grounded outlet.
5
Turn the MFP on.
56 Parallel port [x]
disabled
A status request occurs over the
parallel port, but the parallel port is
disabled.
Touch
Continue
. The MFP discards any data
received on the parallel port.
Touch
Reset Active Bin
to reset the active bin
for a linked set of bins.
56 Serial port [x]
disabled
The MFP receives data across a
serial port, but the port is disabled.
Touch
Continue
. The MFP discards any data
received on the serial port.
Touch
Reset Active Bin
to change to another
linked bin.
56 Standard USB port
disabled
The MFP receives data through a
USB port, but the USB port is
disabled.
Touch
Continue
. The printer discards any data
received through the USB port.
Make sure the USB Buffer menu item is not set
to Disabled.
Touch
Reset Active Bin
to change to another
linked bin.
56 USB port [x] disabled
The MFP receives data through a
specified USB port, but this USB port
is disabled. x is the number of the
USB port.
Touch
Continue
. The MFP discards any data
received through the specified USB port.
Make sure the USB Buffer menu item is not set
to Disabled.
Touch
Reset Active Bin
to change to another
linked bin.
57 Configuration change,
some held jobs were lost
The MFP fails to restore held jobs due
to configuration changes. The
message appears once.
Some held jobs are not restored. They stay on
the hard disk and are inaccessible.
58 Too many disks
installed
The MFP detects an excess of hard
disks installed.
1
Turn the MFP off.
2
Unplug the power cord from the wall outlet.
3
Remove the excess hard disks.
4
Connect the power cord to a properly
grounded outlet.
5
Turn the MFP on.
Message
Meaning
Action