Lexmark X644E Menus and Messages Guide - Page 109

Understanding MFP messages Message 290.02 Scanner jam, remove all originals from the scanner 290.10 Scanner jam, remove all originals from the scanner 291.00 Scanner jam, remove all originals from the scanner 291.01 Scanner jam, remove all originals from the scanner 291.02 Scanner jam, remove all originals from the scanner 292 Scanner jam, remove all originals from the scanner 293 Replace all originals if restarting job. 294.00 Scanner jam, remove all originals from the scanner 294.01 Scanner jam, remove all originals from the scanner 294.02 Scanner jam, remove all originals from the scanner 294.03 Scanner jam, remove all originals from the scanner Meaning Action The scanner fails to feed a sheet far The message clears when the scanner knows enough into the ADF so that the ADF that the sheet is removed from the ADF. recognizes its presence. The scanner detects an original document jam at the first scanning sensor while the scanner is idle. Clear the jam from the scanner to clear the message. The scanner detects an original Clear the jam from the scanner to clear the document jam at the second scanning message. sensor while the scanner is idle. The scanner detects an original document jam at the first scanning sensor. Clear the jam from the scanner to clear the message. The scanner detects an original Remove all original documents from the document jam at the second scanning scanner to clear the jam. The message clears. sensor. The ADF cover is open while the ADF Remove all original documents from the is feeding the original document. scanner to clear the jam. The message clears. The MFP is sent a scan job; however, there is no original document in the ADF. Touch Continue if no scan job is active when the attendance message appears. This clears the message. Touch Cancel Job if a scan job is processing when the attendance message appears. This cancels the job and clears the message. Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF immediately after the last successfully scanned page. Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the flatbed immediately after the last successfully scanned page. Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successfully scanned page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or FTP. Touch Restart job if job recovery is active and the job is restartable. The message clears. A new scan job containing the same parameters as the previous job starts. The scanner detects a jam at the ADF Remove all original documents from the exit sensor while the scanner is idle. scanner to clear the jam. The message clears. The scanner detects a jam at the ADF Remove all original documents from the ADF. exit sensor. The message clears. The scanner detects a jam prior to reaching the ADF exit sensor. Remove all original documents from the ADF. The message clears. The scanner detects a jam at the ADF Remove all original documents from the ADF. exit sensor. The message clears. Attendance messages 109