Lexmark X644E Menus and Messages Guide - Page 35
Standard Parallel or Parallel <x - mac address
UPC - 734646093156
View all Lexmark X644E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Using MFP menus Menu item Mac Binary PS ENA Address ENA Netmask ENA Gateway Purpose Configures the MFP to process Macintosh binary PostScript print jobs. Sets the USB port ENA Address. Sets the USB port ENA Netmask. Sets the USB port ENA Gateway. Values and descriptions On The MFP filters PostScript print jobs using standard protocol. Off The MFP processes raw binary PostScript print jobs from computers using the Macintosh operating system. Note: This setting often causes Windows print jobs to fail. Auto* The MFP processes print jobs from computers using either Windows or Macintosh operating systems. 4 field IP address (0.0.0.0*) Shown only if an ENA is attached through the USB port. Standard Parallel or Parallel Use these menu items to change printer settings affecting jobs sent to the MFP through a parallel port (either Std Parallel or Parallel ). Menu item PCL SmartSwitch PS SmartSwitch Purpose Values and descriptions Configures the MFP so it On* automatically switches to PCL emulation when a print job received through the parallel port requires it, regardless of the default printer language. Off The MFP examines data on the parallel interface and selects PCL emulation if the data indicates that is the required printer language. The MFP does not examine the incoming data. The MFP uses PostScript emulation to process the job if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS SmartSwitch is Off. Configures the MFP so it On* automatically switches to PostScript emulation when a print job received through the parallel port requires it, regardless of the default printer language. Off The MFP examines data on the parallel interface and selects PostScript emulation if the data indicates that is the required printer language. The MFP does not examine the incoming data. The MFP uses PCL emulation to process the job if PCL SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PCL SmartSwitch is Off. Network/Ports 35