Lexmark X644E Menus and Messages Guide - Page 105
Incompatible envelope, Incompatible tray [x]
UPC - 734646093156
View all Lexmark X644E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Understanding MFP messages Message Meaning Action 58 Too many flash options installed The MFP detects an excess of Touch Continue to clear the message and optional flash memory cards installed. ignore the extra optional flash memory cards. The message occurs again unless the excess optional flash memory cards are removed. 1 Turn the MFP off. 2 Unplug the power cord from the wall outlet. 3 Remove the excess flash memory. 4 Connect the power cord to a properly grounded outlet. 5 Turn the MFP on. 58 Too many trays attached The MFP detects that too many optional drawers and their matching trays are installed. 1 Turn the MFP off. 2 Unplug the power cord from the wall outlet. 3 Remove the additional drawers. 4 Connect the power cord to a properly grounded outlet. 5 Turn the MFP on. 59 Incompatible duplex An unsupported optional duplex unit is attached to the MFP. Remove the optional duplex unit. The MFP ceases normal functions until the optional duplex unit is removed. Touch Continue to clear the message once the optional duplex unit is removed. 59 Incompatible envelope An unsupported optional envelope feeder feeder is attached to the MFP. Remove the optional envelope feeder. The MFP ceases normal functions until the optional envelope feeder is removed. Touch Continue to clear the message once the optional envelope feeder is removed. 59 Incompatible tray [x] An unsupported optional drawer and its matching tray are attached to the MFP. Remove the optional drawer. The MFP ceases normal functions until the optional drawer is removed. Touch Continue to clear the message once the optional drawer is removed. 61 Remove defective disk The MFP detects a defective hard disk. 1 Turn the MFP off. 2 Unplug the power cord from the wall outlet. 3 Remove the defective hard disk. 4 Install a new hard disk. 5 Connect the power cord to a properly grounded outlet. 6 Turn the MFP on. 62 Disk full The MFP detects that there is not enough memory or space on the hard disk to store the data of the print job. Touch Continue to clear the message and continue processing the current print job. Any information not previously stored on the hard disk is deleted. • Delete fonts, macros, and other data stored on the hard disk. • Install a hard disk with a larger memory capacity. 63 Unformatted disk The hard disk is not formatted. Format the hard disk prior to performing operations that require the hard disk. If the message remains, the hard disk may be defective and require replacing. Attendance messages 105