Maytag MED5800TW Technical Education - Page 27

PLAN VENT SYSTEM Recommended exhaust installations Typical installations vent the dryer from the rear of the dryer. Other installations are possible. B C D A E F G B A. Dryer B. Elbow C. Wall D. Exhaust hood H E. Clamps F. Rigid metal or flexible metal vent G. Vent length necessary to connect elbows H. Exhaust outlet Standard exhaust installation with rigid metal or flexible metal vent NOTE: The following kits for close clearance alternate installations are available for purchase. Please see the "Assistance or Service" section of the "Use & Care Guide" to order: • Over-the-Top Installation: Part Number 4396028 • Periscope Installation (For use with dryer vent to wall vent mismatch): Part Number 4396037 - 0˝ (0 cm) to 18˝ (45.72 cm) mismatch Part Number 4396011 - 18˝ (45.72 cm) to 29˝ (73.66 cm) mismatch Part Number 4396014 - 29˝ (73.66 cm) to 50˝ (127 cm) mismatch Special provisions for mobile home installations The exhaust vent must be securely fastened to a noncombustible portion of the mobile home structure and must not terminate beneath the mobile home. Terminate the exhaust vent outside. Alternate installations for close clearances Venting systems come in many varieties. Select the type best for your installation. Two close-clearance installations are shown. Refer to the manufacturer's instructions. A B A. Over-the-top installation (also available with one offset elbow) B. Periscope installation 2-19