Maytag MED5800TW Technical Education - Page 51

Reassembly Note

Get Maytag MED5800TW - Electric Dryer PDF manuals and user guides View all Maytag MED5800TW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

7. Place a 13/16˝ wrench on the back of the blower wheel, and a 7/16˝ wrench on the front of the drive motor shaft (flatted). Turn the drive motor shaft to the right (clockwise) and loosen the blower wheel (left-hand thread). 13/16˝ Wrench Blower Wheel Loosen Loosen REASSEMBLY NOTE : When you reinstall the drive motor, make sure that the rounded locator tab is in the bracket slot, as shown below. 7/16˝ Wrench Flatted Drive Shaft 8. Remove the four screws from the air duct at the rear of the unit and pull the duct forward so that you can access the blower wheel (see page 4-18 for the procedure). 9. Spin the blower wheel clockwise and remove it from the drive motor shaft (see the top right photo). Locator Tab In Slot 4-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
4-11
Loosen
REASSEMBLY NOTE :
When you reinstall the
drive motor, make sure that the rounded locator
tab is in the bracket slot, as shown below.
8.
Remove the four screws from the air duct
at the rear of the unit and pull the duct for-
ward so that you can access the blower
wheel (see page 4-18 for the procedure).
9.
Spin the blower wheel clockwise and re-
move it from the drive motor shaft (see
the top right photo).
Loosen
7.
Place a 13/16
˝
wrench on the back of
the blower wheel, and a 7/16
˝
wrench on
the front of the drive motor shaft (flatted).
Turn the drive motor shaft to the right
(clockwise) and loosen the blower wheel
(left-hand thread).
Flatted
Drive Shaft
13/16
˝
Wrench
Blower Wheel
Locator Tab In Slot
7/16
˝
Wrench