Maytag MED5800TW Technical Education - Page 53
Removing The High-limit Thermostat And, Thermal Cutoff Tco Gas Models Only
View all Maytag MED5800TW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
REMOVING THE HIGH-LIMIT THERMOSTAT AND THERMAL CUTOFF (TCO) (GAS MODELS ONLY) WARNING Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. b) Remove the two hex-head screws and remove the high-limit thermostat. 6. To remove the thermal cutoff (TCO): a) Remove the two wires from the TCO terminals. b) Remove the hex-head screw, unhook the end of the bracket, and remove the TCO. RD-WH Screw High-Limit Thermostat 1. Unplug dryer or disconnect power. 2. Turn off gas supply to dryer. 3. Pull the dryer out from the wall so that you can access the rear panel. 4. Remove the nine hex-head screws from the rear panel and remove the panel. BK Thermal Cutoff (TCO) Screws RD Rear Panel Screws (1 of 9) 5. To remove the high-limit thermostat: a) Remove the two wires from the thermostat terminals (see right photos). 4-13 Viewed From Rear Of Dryer