Miele Scout RX3 Operating instructions/Installation instructions - Page 20
again. The robot vacuum cleaner will
View all Miele Scout RX3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
en-US The robot vacuum cleaner will stand still when there is low battery capacity. Charge the robot vacuum cleaner. Interrupting vacuuming Vacuuming manually You can use the direction buttons on the remote control to vacuum a particular area of the room. While the robot vacuum cleaner is vacuuming, press and hold one of the direction buttons. The robot vacuum cleaner will turn in the desired direction until you let go of the direction button. Press and hold the + direction button. The robot vacuum cleaner will travel in the desired direction and continue to vacuum. Press the button on the remote control or the sensor control in the control field. The original vacuuming process will continue running. Press the button on the remote control or the sensor control in the control field. The robot vacuum cleaner stops. Press the button or the sensor control again to continue vacuuming. If you lift the robot vacuum cleaner off the floor during a pause and then place it down somewhere else, rLOC will appear in the display when you activate it again. The robot vacuum cleaner will turn around and compare its new location with its saved map data. If the data is compatible, the robot vacuum cleaner will start cleaning and not go over surfaces that have already been cleaned. If the data is not compatible, the robot vacuum cleaner will not move. rLOC in the display can only be canceled by pressing the button or the sensor control several times. Manual navigation (without vacuuming) You can use the direction buttons on the remote control to direct the robot vacuum cleaner to a specific area of the room. Press and hold one of the direction buttons. 20