Miele Scout RX3 Operating instructions/Installation instructions - Page 62

vacuum in the dark. However, please

Page 62 highlights

en-CA Option 2 (control field)  Press the sensor control for the operating mode you want to use.  Press the  sensor control to start vacuuming. Quitting the current operating mode Setting the timer (only possible if the clock has been set) If you would like the robot vacuum cleaner to start at the same time every day, you can save the start time and the operating mode you want to memory. The robot vacuum cleaner can also vacuum in the dark. However, please be aware that vacuuming may be less thorough. The cameras require light in order to navigate unobstructed. Use the remote control to set the timer.  Press the Power button on the remote control or the  sensor control in the control field for at least 3 seconds. The robot vacuum cleaner will switch to standby after approx. 60 seconds.  Press the Timer button briefly. The timer  indicator flashes in the control field and the hour display flashes in the display. You can switch the robot vacuum cleaner to standby before 60 seconds is up by pressing the Power button again. The robot vacuum cleaner is reactivated by pressing any button on the remote control or one of the sensor controls in the control field.  Press the + or - direction button to set the hour you want.  Press the OK button to confirm your selection. The timer  indicator flashes in the control field and the minute display flashes in the display. 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

en-CA
62
Option 2 (control field)
Press the sensor control for the
operating mode you want to use.
Press the

 sensor control to start
vacuuming.
Quitting the current operating mode
Press the
Power
 button on the
remote control or the

 sensor
control in the control field for at least
3 seconds.
The robot vacuum cleaner will switch to
standby after approx. 60 seconds.
You can switch the robot vacuum
cleaner to standby before 60 seconds
is up by pressing the
Power
 button
again.
The robot vacuum cleaner is reactivated
by pressing any button on the remote
control or one of the sensor controls in
the control field.
Setting the timer
(only possible if the clock has been set)
If you would like the robot vacuum
cleaner to start at the same time every
day, you can save the start time and the
operating mode you want to memory.
The robot vacuum cleaner can also
vacuum in the dark. However, please be
aware that vacuuming may be less
thorough. The cameras require light in
order to navigate unobstructed.
Use the remote control to set the timer.
Press the
Timer
 button briefly.
The timer 
 indicator flashes in the
control field and the hour display
flashes in the display.
Press the + or - direction button to
set the hour you want.
Press the
OK
 button to confirm your
selection.
The timer 
 indicator flashes in the
control field and the minute display
flashes in the display.