Miele Scout RX3 Operating instructions/Installation instructions - Page 34

Storage/factory default set, tings, Customer Service

Page 34 highlights

en-US  Damage due to unsuitable clean- ing agents. All surfaces are susceptible to scratching. Contact with unsuitable cleaning agents can alter or discolor the external surfaces. Do not use abrasive cleaning agents, glass cleaning agents, all-purpose cleaners, or oil-based care products. Storage/factory default settings  Press and hold the Spot and Turbo sensor controls in the control field at the same time for at least 5 seconds. r:St will appear in the display. Storage Switch the robot vacuum cleaner off if it is not going to be used for a long period of time. To switch it off, slide the I/0 switch on the side of the robot vacuum cleaner to the 0 position. If the robot vacuum cleaner is not going to be used for an extended period of time, make sure it is stored in a well ventilated, cool place, but not at an ambient temperature below 0°C. For optimum care, store the robot vacuum cleaner at half charge capacity (rechargeable-battery status indicator in the control field is orange). Factory defaults The robot vacuum cleaner can be reset to its factory default settings. Have the remote control in hand.  Within the next 2 seconds, press the OK button on the remote control until F:tr appears in the display. The robot vacuum cleaner will restart with its default factory settings restored. Customer Service Information to help you rectify faults yourself and about Miele spare parts can be found at www.miele.com/service. Contact in case of fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Service. Contact information for Miele Service can be found at the end of this document. Warranty For more information about warranty conditions, please contact Miele Service. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

en-US
34
Damage due to unsuitable clean-
ing agents.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or discolor
the external surfaces.
Do not use abrasive cleaning agents,
glass cleaning agents, all-purpose
cleaners, or oil-based care products.
Storage/factory default set-
tings
Storage
Switch the robot vacuum cleaner off
if it is not going to be used for a long
period of time. To switch it off, slide
the
I
/
0
switch on the side of the ro-
bot vacuum cleaner to the
0
position.
If the robot vacuum cleaner is not going
to be used for an extended period of
time, make sure it is stored in a well
ventilated, cool place, but not at an am-
bient temperature below 0°C.
For optimum care, store the robot vac-
uum cleaner at half charge capacity
(rechargeable-battery status indicator
in the control field is orange).
Factory defaults
The robot vacuum cleaner can be reset
to its factory default settings. Have the
remote control in hand.
Press and hold the
Spot
and
Turbo
 sensor controls in the control
field at the same time for at least
5 seconds.
r:St
will appear in the display.
Within the next 2 seconds, press the
OK
 button on the remote control until
F:tr
appears in the display.
The robot vacuum cleaner will restart
with its default factory settings restored.
Customer Service
Information to help you rectify faults
yourself and about Miele spare parts
can be found at www.miele.com/ser-
vice.
Contact in case of fault
In the event of a fault which you cannot
remedy yourself, please contact your
Miele dealer or Miele Service.
Contact information for Miele Service
can be found at the end of this docu-
ment.
Warranty
For more information about warranty
conditions, please contact Miele Ser-
vice.