Miele Scout RX3 Operating instructions/Installation instructions - Page 71

upside down on a level, clean

Page 71 highlights

en-CA In order to continue to achieve the best possible cleaning results, replace the seal unit with a new one after approx. 1 year. Replacing the seal unit on the dust box  Remove the dust box.  Remove any threads and hair and clean the front wheel, the cover, and the slot depression using the cleaning tool.  Refit the front wheel and close the cover making sure it clicks into position.  Unlatch the seal unit from the underside of the dust box so that the arrow points to the  symbol.  Remove the seal unit.  Insert the new seal unit so that the arrow points to the  symbol.  Lock the seal unit, making sure it clicks into position. The arrow points to the  symbol. Cleaning the front wheel Clean the front wheel as required. For this you will require the cleaning tool which is located at the top of the dust box lid.  Place the robot vacuum cleaner upside down on a level, clean surface. Cleaning the sensors Clean the sensors as required.  Place the robot vacuum cleaner upside down on a level, clean surface.  Clean the sensors carefully using a dry cotton wool bud.  Unclip the cover.  Remove the front wheel. 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

en-CA
71
In order to continue to achieve the
best possible cleaning results,
replace the seal unit with a new one
after approx. 1 year.
Replacing the seal unit on the dust
box
Remove the dust box.
Unlatch the seal unit from the
underside of the dust box so that the
arrow points to the
 symbol.
Remove the seal unit.
Insert the new seal unit so that the
arrow points to the
 symbol.
Lock the seal unit, making sure it
clicks into position.
The arrow points to the
symbol.
Cleaning the front wheel
Clean the front wheel as required. For
this you will require the cleaning tool
which is located at the top of the dust
box lid.
Place the robot vacuum cleaner
upside down on a level, clean
surface.
Unclip the cover.
Remove the front wheel.
Remove any threads and hair and
clean the front wheel, the cover, and
the slot depression using the cleaning
tool.
Refit the front wheel and close the
cover making sure it clicks into
position.
Cleaning the sensors
Clean the sensors as required.
Place the robot vacuum cleaner
upside down on a level, clean
surface.
Clean the sensors carefully using a
dry cotton wool bud.