Miele Scout RX3 Operating instructions/Installation instructions - Page 74
Maintenance, Storage / factory default, settings
View all Miele Scout RX3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
en-CA Maintenance Risk of injury caused by rotating roller brush. The robot vacuum cleaner may start without warning while maintenance work is being carried out. Switch the robot vacuum cleaner off before doing any maintenance work. To switch it off, press the I / 0 switch on the side of the robot vacuum cleaner to the 0 position. Robot vacuum cleaner and accessories Risk of electric shock from mains voltage. If moisture gets into the robot vacuum cleaner and accessories, there is a risk of electric shock. Do not immerse the robot vacuum cleaner or any accessories supplied with it in water. Observe the special cleaning instructions in the "Maintenance" section. Clean the robot vacuum cleaner and all plastic accessories with a commercially available cleaner suitable for plastic. Static charge can cause a build-up of dust on the robot vacuum cleaner. This should be removed using a soft, dry cloth. Damage due to unsuitable cleaning agents. All surfaces are susceptible to scratching. Contact with unsuitable cleaning agents can alter or discolour the external surfaces. Do not use abrasive cleaning agents, glass cleaning agents, all-purpose cleaners, or oil-based care products. Storage / factory default settings Storage Switch the robot vacuum cleaner off if it is not going to be used for a long period of time. To switch it off, press the I / 0 switch on the side of the robot vacuum cleaner to the 0 position. If the robot vacuum cleaner is not going to be used for an extended period of time, make sure it is stored in a well ventilated, cool place, but not at an ambient temperature below 0°C. For optimum care, store the robot vacuum cleaner at half charge capacity (rechargeable battery status indicator in the control field is orange). 74