Miele Scout RX3 Operating instructions/Installation instructions - Page 30
clicks into position.
View all Miele Scout RX3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
en-US Pull the bearing cover off the roller brush and remove any threads or hairs that have wound themselves around the bearing. Reinstall the bearing cover, making sure it clicks into position. Reinstall the roller brush with the bearing cover attached. Make sure that the side with the pointed end is inserted into the corresponding slot. Use a pair of scissors to cut any threads or hairs that have wound themselves around the roller brush. Carefully reinstall the roller-brush cover on both sides, making sure it clicks into position. Reinstall the side brushes; see "Cleaning the side brushes". In order to continue to achieve the best possible cleaning results, replace the roller brush with a new one after approx. 1 year. Remove the threads and hair using the wiper which is located on the bottom of the cleaning tool. Hold the wiper over a garbage can. Cleaning the dust-box seals Clean the seals on the bottom of the dust box as required. Place the robot vacuum cleaner upside down on a level, clean surface. Press the button at the top of the wiper several times until all threads and hair have fallen out. Wipe the seals with a slightly damp cloth to clean them. 30