Miele Scout RX3 Operating instructions/Installation instructions - Page 31

Portant Safety Instructions

Page 31 highlights

en-US In order to continue to achieve the best possible cleaning results, replace the seal unit with a new one after approx. 1 year. Replacing the seal unit on the dust box  Remove the dust box.  Remove any threads and hair and clean the front wheel, the cover, and the slot depression using the cleaning tool.  Refit the front wheel and close the cover making sure it clicks into position.  Unlatch the seal unit from the underside of the dust box so that the arrow points to the  symbol.  Remove the seal unit.  Insert the new seal unit so that the arrow points to the  symbol.  Lock the seal unit, making sure it clicks into position. The arrow points to the  symbol. Cleaning the front wheel Clean the front wheel as required. For this you will require the cleaning tool which is located at the top of the dust box lid.  Place the robot vacuum cleaner upside down on a level, clean surface. Cleaning the sensors Clean the sensors as required.  Place the robot vacuum cleaner up- side down on a level, clean surface.  Clean the sensors carefully using a dry cotton swab. Replacing batteries in the remote control 2 batteries (AAA, 1.5 V) are required. Observe the instructions and safety notes regarding the handling and disposal of batteries found in the "IMPORTANT SAFETY INSTRUCTIONS" and "Caring for the environment" sections at the beginning of these operating instructions.  Unclip the cover.  Remove the front wheel. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

en-US
31
In order to continue to achieve the
best possible cleaning results, re-
place the seal unit with a new one af-
ter approx. 1 year.
Replacing the seal unit on the dust
box
Remove the dust box.
Unlatch the seal unit from the under-
side of the dust box so that the arrow
points to the
 symbol.
Remove the seal unit.
Insert the new seal unit so that the ar-
row points to the
 symbol.
Lock the seal unit, making sure it
clicks into position.
The arrow points to the
symbol.
Cleaning the front wheel
Clean the front wheel as required. For
this you will require the cleaning tool
which is located at the top of the dust
box lid.
Place the robot vacuum cleaner up-
side down on a level, clean surface.
Unclip the cover.
Remove the front wheel.
Remove any threads and hair and
clean the front wheel, the cover, and
the slot depression using the cleaning
tool.
Refit the front wheel and close the
cover making sure it clicks into posi-
tion.
Cleaning the sensors
Clean the sensors as required.
Place the robot vacuum cleaner up-
side down on a level, clean surface.
Clean the sensors carefully using a
dry cotton swab.
Replacing batteries in the remote
control
2 batteries (AAA, 1.5 V) are required.
Observe the instructions and safety
notes regarding the handling and dis-
posal of batteries found in the “IM-
PORTANT SAFETY INSTRUCTIONS”
and “Caring for the environment” sec-
tions at the beginning of these operat-
ing instructions.