Miele Scout RX3 Operating instructions/Installation instructions - Page 29

place the pair of side brushes after

Page 29 highlights

en-US  20-arm universal side brushes: take hold of opposing side brushes (one long and one short bunch per hand) and pull them upward to remove them.  Press the two cleaned side brushes carefully onto their pins until they audibly engage. Take care to comply with the markings L and R. In order to continue to achieve the best possible cleaning results, replace the pair of side brushes after approx. 1 year.  6-arm carpet side brushes: take hold of opposing elastic side-brush holders (one holder per hand) and pull them upward to remove them.  Remove threads and hair using the wiper which is located on the bottom of the cleaning tool.  Hold the wiper over a garbage can. Cleaning the roller brush Clean the roller brush as required. This will require the cleaning tool which is located at the top of the dust-box lid.  Place the robot vacuum cleaner upside down on a level, clean surface.  Remove both side brushes; see "Cleaning the side brushes".  Press the button at the top of the wiper several times until all threads and hair have fallen out.  Unlatch the roller-brush cover and remove the cover.  Remove the roller brush. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

en-US
29
20-arm universal side brushes: take
hold of opposing side brushes (one
long and one short bunch per hand)
and pull them upward to remove
them.
6-arm carpet side brushes: take hold
of opposing elastic side-brush hold-
ers (one holder per hand) and pull
them upward to remove them.
Remove threads and hair using the
wiper which is located on the bottom
of the cleaning tool.
Hold the wiper over a garbage can.
Press the button at the top of the
wiper several times until all threads
and hair have fallen out.
Press the two cleaned side brushes
carefully onto their pins until they au-
dibly engage. Take care to comply
with the markings
L
and
R
.
In order to continue to achieve the
best possible cleaning results, re-
place the pair of side brushes after
approx. 1 year.
Cleaning the roller brush
Clean the roller brush as required. This
will require the cleaning tool which is lo-
cated at the top of the dust-box lid.
Place the robot vacuum cleaner up-
side down on a level, clean surface.
Remove both side brushes; see
“Cleaning the side brushes”.
Unlatch the roller-brush cover and re-
move the cover.
Remove the roller brush.