Miele Scout RX3 Operating instructions/Installation instructions - Page 68
The filter assembly is complete.
View all Miele Scout RX3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
en-CA Replace the lid and close the dust box, making sure it clicks into place. Place the dust box into the robot vacuum cleaner with the handle lifted up and latch it into place by pushing the handle back down. Close the storage compartment lid and press down on the depression in order to lock it. Fold out the filter assembly from the dust box. Remove the pre-filter and clean it as required using the cleaning tool. Cleaning the dust box Clean the dust box as required. A cleaning tool is located at the top of the dust box lid. Remove the cleaning tool. Release the exhaust filter and clean it using the cleaning tool. Reinstall the exhaust filter in the cover. Place the pre-filter onto the exhaust filter. The filter assembly is complete. Carefully refit the filter assembly on the dust box and clip the filter assembly into position. Clean the dust box and the underside of the lid using the cleaning tool. Cleaning the exhaust filter Clean the exhaust filter as required. The exhaust filter compartment is located in the dust box. Remove the lid from the dust box. The exhaust filter must be replaced with a new one after approx. 6 months in order to achieve the best possible cleaning results. Cleaning the side brushes Clean the side brushes as required. For this you will require the cleaning tool which is located at the top of the dust box lid. Place the robot vacuum cleaner upside down on a level, clean surface. 68