Miele Scout RX3 Operating instructions/Installation instructions - Page 78
cleaner or too far away from it.
View all Miele Scout RX3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
en-CA Problem The robot vacuum cleaner does not react. "l_ _l" appears in the display running from bottom to top. rLOC appears in the display. Possible cause and solution The robot vacuum cleaner is switched off. Switch it on (slide I/0 to I). The batteries in the remote control have been inserted incorrectly. Make sure the polarity is correct. The batteries in the remote control are dead. Replace the batteries. The signal between the infrared transmitter on the vacuum cleaner and the remote control is broken. Clean the front of the robot vacuum cleaner and the top of the remote control carefully with a soft, dry cloth and make sure that no items disrupt the signal. The remote control is too near to the robot vacuum cleaner or too far away from it. Increase or decrease the distance and when using the remote control direct it towards the robot vacuum cleaner. The dust box is full. Empty and clean the dust box. Vacuuming was interrupted; the robot vacuum cleaner was moved during the pause. Proceed as described in "Use" - "Interrupting vacuuming". 78