Miele Scout RX3 Operating instructions/Installation instructions - Page 39

Technical data, Declaration of conformity

Page 39 highlights

en-US Problem F 7 F 8 Resetting the fault message after fixing the problem Possible cause and solution Internal system error or fault "Robot vacuum cleaner outside of its permitted ambient operating temperature"  Switch the robot vacuum cleaner off and on again (I/0 switch). "Front wheel dirty" fault  Check if the front wheel, the cover, or the slot de- pression have become dirty. Remove any threads or hair, and clean the front wheel, the cover, and the depression. You can reset the fault messages described above in the following ways - Switch the robot vacuum cleaner off and on again (I/0 switch). - Press the Power button on the remote control. - Press the  sensor control in the control field of the robot vacuum cleaner for at least three seconds. Technical data (for the WiFi module) Frequency range Maximum transmission power 2.412-2.472 GHz < 100 mW Declaration of conformity Miele hereby declares that this robot vacuum cleaner complies with Directive 2014/53/EU. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

en-US
39
Problem
Possible cause and solution
F 7
Internal system error or fault “Robot vacuum cleaner
outside of its permitted ambient operating tempera-
ture”
Switch the robot vacuum cleaner off and on again
(
I
/
0
switch).
F 8
“Front wheel dirty” fault
Check if the front wheel, the cover, or the slot de-
pression have become dirty. Remove any threads
or hair, and clean the front wheel, the cover, and
the depression.
Resetting the fault
message after fixing
the problem
You can reset the fault messages described above
in the following ways
-
Switch the robot vacuum cleaner off and on again
(
I
/
0
switch).
-
Press the
Power
button on the remote control.
-
Press the

sensor control in the control field of
the robot vacuum cleaner for at least three sec-
onds.
Technical data
(for the WiFi module)
Frequency range
2.412–2.472 GHz
Maximum transmission power
< 100 mW
Declaration of conformity
Miele hereby declares that this robot vacuum cleaner complies with Directive
2014/53/EU.