Miele Scout RX3 Operating instructions/Installation instructions - Page 33
Cleaning and care
View all Miele Scout RX3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
en-US Scout RX3 Runner and Scout RX3 Home Vision HD (YCR-MT12 or AP30) Carefully remove the rechargeable battery using the tab until the plug connection is exposed. Press the latch on the plug connection in order to release the electrical plug. Cleaning and care Risk of injury caused by rotating roller brush. The robot vacuum cleaner may start without warning while maintenance work is being carried out. Switch the robot vacuum cleaner off before doing any maintenance work. To switch it off, slide the I/0 switch on the side of the robot vacuum cleaner to the 0 position. Robot vacuum cleaner and accessories Insert the electrical plug of the new rechargeable battery into the counterpart, making sure it clicks into place. Store the plug connection in the side recess. Insert the rechargeable battery carefully, making sure it is properly positioned (see right-hand side of picture). Risk of electric shock from volt- age. If moisture gets into the robot vacuum cleaner and accessories, there is a risk of electric shock. Do not immerse the robot vacuum cleaner or any accessories supplied with it in water. Observe the special cleaning instructions in the "Maintenance" section. Clean the robot vacuum cleaner and all plastic accessories with a commercially available cleaner suitable for plastic. Carefully reinstall the cover of the rechargeable-battery compartment and close it, making sure that it clicks into place. Static charge can cause a build-up of dust on the robot vacuum cleaner. This should be removed using a soft, dry cloth. 33