Miele TXI 680 WP Eco and Steam Operating instructions/Installation instruction - Page 34
Program end – removing the laundry, Program end, Removing the laundry, Drum lighting
![]() |
View all Miele TXI 680 WP Eco and Steam manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
6. Program end - removing the laundry Program end The program is finished when End/AntiCrease or End appears in the display. The Start/Add laundry sensor light goes out. The tumble dryer will switch off automatically 15 minutes after the end of the Anti-crease phase (with programs without an Anti-crease phase it will switch off 15 minutes after the end of the program). Removing the laundry Only open the door when the drying process has finished. Otherwise, the laundry will not be properly dried through and cooled down. Pull the door open at the side with the orange marker. Turn the program selector to the position. Remove the lint from the 2 lint filters in the door opening: see "Cleaning and care", "Cleaning lint filters". Shut the door gently. Empty the condensed water container. Tip: The condensed water can be used for the Steam Care program. See "Condensed water container - Preparing the condensed water container for the Steam Care program". Drum lighting The inside of the drum lights up so that you don't forget any items of laundry when you empty it. The drum lighting switches off automatically (energy saving). Remove the laundry. Items left in the dryer could be damaged by over-drying when the dryer is used the next time. Always remove all items from the drum. 34
![](/manual_guide/products/miele-txi-680-wp-eco-steam-operating-instructionsinstallation-instructions-7316ef7/34.png)