Miele TXI 680 WP Eco and Steam Operating instructions/Installation instruction - Page 61

The drying cycle duration is very long, Problem, Possible cause and solution, The drying process

Get Miele TXI 680 WP Eco and Steam PDF manuals and user guides View all Miele TXI 680 WP Eco and Steam manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Frequently Asked Questions The drying cycle duration is very long Problem The drying process goes on too long or even switches off.* Possible cause and solution The room where the tumble dryer is located is too warm.  Ventilate the room thoroughly. Detergent residue, hair, and fine lint can clog the filters.  Clean the lint filters and the plinth filter.  Remove visible lint - at the bottom left, behind the panel in the heat exchanger cavity (see "Cleaning and care") - at the bottom right of the cooling fins behind the grille (see the end of this section) The laundry is unevenly distributed or has rolled up. The drum is too full.  Untangle the laundry and remove a few items.  Start a program. The cool air intake (bottom right grille) is blocked.  Move any objects, such as a laundry basket, away from the dryer. The laundry is too damp.  Spin using a higher spin speed in the washing ma- chine. Metallic components, e.g., zippers, have prevented the dryer from registering the correct moisture level.  Open the zippers next time.  If the problem recurs, dry these items using the Time Dry program. * Switch the tumble dryer off and on again before starting a new program. 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Frequently Asked Questions
61
The drying cycle duration is very long
Problem
Possible cause and solution
The drying process
goes on too long or
even switches off.*
The room where the tumble dryer is located is too
warm.
Ventilate the room thoroughly.
Detergent residue, hair, and fine lint can clog the fil-
ters.
Clean the lint filters and the plinth filter.
Remove visible lint
–
at the bottom left, behind the panel in the heat
exchanger cavity (see “Cleaning and care”)
–
at the bottom right of the cooling fins behind the
grille (see the end of this section)
The laundry is unevenly distributed or has rolled up.
The drum is too full.
Untangle the laundry and remove a few items.
Start a program.
The cool air intake (bottom right grille) is blocked.
Move any objects, such as a laundry basket, away
from the dryer.
The laundry is too damp.
Spin using a higher spin speed in the washing ma-
chine.
Metallic components, e.g., zippers, have prevented
the dryer from registering the correct moisture level.
Open the zippers next time.
If the problem recurs, dry these items using the
Time Dry
program.
* Switch the tumble dryer off and on again before starting a new program.