Miele TXI 680 WP Eco and Steam Operating instructions/Installation instruction - Page 76
Before moving the tumble dryer again, Additional installation requirements, Slot-in
![]() |
View all Miele TXI 680 WP Eco and Steam manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
*INSTALLATION* Installation Before moving the tumble dryer again A small quantity of condensed water that remains in the area around the pump after the drying process can run out if the dryer is tilted. Recommendation: Start the Time Dry program for approx. 1 minute before transporting the dryer. Any remaining condensed water will then be fed into the condensed water container (which you will need to empty again) or out through the drain hose. Installing the dryer in a closet Minimum installation distance You must insert sufficiently large ventilation openings into the closet door. You can also open the closet door slightly while the dryer is operating. Otherwise, the dryer can overheat, which can cause a fault. Additional installation requirements All installations must be carried out in accordance with local regulations. Slot-in This tumble dryer is suitable for pushing under a countertop. It is very important to avoid a build-up of heat. The warm air which is expelled from the dryer must be able to dissipate. Warm air which cannot dissipate could cause a fault. - The appliance lid must not be removed. - The electrical socket must be located in an accessible position near the tumble dryer. - Drying durations may increase slightly. Ensure that the dryer door can be opened at any time. Ensure that the laundry can easily be removed at any time. 76
![](/manual_guide/products/miele-txi-680-wp-eco-steam-operating-instructionsinstallation-instructions-7316ef7/76.png)