Miele TXI 680 WP Eco and Steam Operating instructions/Installation instruction - Page 62

General problems with the tumble dryer, switched off at the end

Get Miele TXI 680 WP Eco and Steam PDF manuals and user guides View all Miele TXI 680 WP Eco and Steam manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Frequently Asked Questions General problems with the tumble dryer Problem You can hear operating noises (buzzing/humming). A program does not start. The display is off and the Start/Add laundry sensor button is flashing slowly. The tumble dryer is switched off at the end of the program. The display is in a different language. The interior drum lighting does not come on. Possible cause and solution This is not a fault. The compressor (heat pump) is operating.  No action required. These noises are quite normal and can be heard when the compressor is operating. There is no obvious cause.  Connect the power plug.  Turn on the tumble dryer.  Close the door.  Check whether the fuse has tripped. Power outage? When power is restored, any previously running program will restart automatically. The display has switched off automatically to save energy (Standby mode). The drum will turn at intervals in the Anti-crease phase.  Press any button. This switches Standby off. The tumble dryer switches off automatically. This is not a fault, but a normal function. A different language has been selected in "Settings, Language ".  Set the language you want. The flag symbol will guide you. Not a fault. The drum lighting switches off automatically in the following cases: If the door is closed. If the door remains open for an extended period of time. 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Frequently Asked Questions
62
General problems with the tumble dryer
Problem
Possible cause and solution
You can hear operating
noises (buzzing/hum-
ming).
This is not a fault.
The compressor (heat pump) is operating.
No action required. These noises are quite normal
and can be heard when the compressor is operat-
ing.
A program does not
start.
There is no obvious cause.
Connect the power plug.
Turn on the tumble dryer.
Close the door.
Check whether the fuse has tripped.
Power outage? When power is restored, any previ-
ously running program will restart automatically.
The display is off and
the
Start/Add laundry
sensor button is flash-
ing slowly.
The display has switched off automatically to save
energy (Standby mode).
The drum will turn at intervals in the Anti-crease
phase.
Press any button. This switches Standby off.
The tumble dryer is
switched off at the end
of the program.
The tumble dryer switches off automatically. This is
not a fault, but a normal function.
The display is in a dif-
ferent language.
A different language has been selected in “Settings,
Language
”.
Set the language you want. The flag symbol will
guide you.
The interior drum light-
ing does not come on.
Not a fault. The drum lighting switches off automati-
cally in the following cases:
If the door is closed.
If the door remains open for an extended period of
time.