Miele TXI 680 WP Eco and Steam Operating instructions/Installation instruction - Page 84
Change the door hinge on the door, Remove the door hinge and turn it
![]() |
View all Miele TXI 680 WP Eco and Steam manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
*INSTALLATION* Installation 5. Change the door hinge on the door The door hinge is secured to the door with 2 angled rods. These rods need to be removed with a screwdriver or pointed pliers. Tip: In some circumstances, the rods can be difficult to dislodge. Moving the screwdriver with a levering action while pulling at the same time may help to work the rods free. Remove the door hinge and turn it by 180°. Refit the door hinge on the opposite side of the door. Insert the end of the screwdriver blade under rod and rotate it so it is in an upright position. Do the same to the other rod. Secure the door hinge with the two rods . Position the screwdriver under the end of the rod and then push it into its resting position . Use the screwdriver or pointed pliers to guide first one then the other rod to the middle until each can be removed. 84
![](/manual_guide/products/miele-txi-680-wp-eco-steam-operating-instructionsinstallation-instructions-7316ef7/84.png)