Miele TXI 680 WP Eco and Steam Operating instructions/Installation instruction - Page 68

Bottom right grille, with a dusting brush attached. Only

Page 68 highlights

Frequently Asked Questions Bottom right grille  In general, the cooling fins be- hind the grille on the bottom right do not need cleaning. They should only be cleaned if the drying process is taking an exceptionally long time due to a very high level of dust or lint in the room in which the dryer is located.  First open the panel for the plinth filter (bottom left). To remove the grille, the catch underneath it needs to be released using a teaspoon.  Danger of injury! Do not touch the cooling fins with your hands. You could cut yourself.  Clean using a vacuum cleaner with a dusting brush attached. Only pass the vacuum cleaner brush over them lightly, without applying any pressure. Take care not to bend the cooling fins out of shape or to damage them.  Insert a spoon handle underneath the grille in the middle.  Press the spoon handle against the catch and lever the grille open.  Remove the grille.  Carefully vacuum up any visible lint or dirt.  Re-insert the 3 hooks on the grille into the appropriate holes in the front of the dryer.  Press the grille firmly back into position by pressing it in at the middle on the left. 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

Frequently Asked Questions
68
Bottom right grille
In general, the cooling fins be-
hind the grille on the bottom right do
not need cleaning. They should only
be cleaned if the drying process is
taking an exceptionally long time due
to a very high level of dust or lint in
the room in which the dryer is lo-
cated.
First open the panel for the plinth fil-
ter (bottom left).
To remove the grille, the catch under-
neath it needs to be released using a
teaspoon.
Insert a spoon handle underneath the
grille in the middle.
Press the spoon handle against the
catch and lever the grille open.
Remove the grille.
Danger of injury! Do not touch
the cooling fins with your hands. You
could cut yourself.
Clean using a vacuum cleaner
with a dusting brush attached. Only
pass the vacuum cleaner brush over
them lightly, without applying any
pressure.
Take care not to bend the cooling
fins out of shape or to damage them.
Carefully vacuum up any visible lint or
dirt.
Re-insert the 3 hooks on the grille
into the appropriate holes in the front
of the dryer.
Press the grille firmly back into posi-
tion by pressing it in at the middle on
the left.