Miele TXI 680 WP Eco and Steam Operating instructions/Installation instruction - Page 67
Replacing the blocked spray jet for the Steam Care program
![]() |
View all Miele TXI 680 WP Eco and Steam manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Frequently Asked Questions Replacing the blocked spray jet for the Steam Care program Limescale deposits will impair the spray jet. In this case, the spray jet must be removed and replaced with a new one (see "Optional accessories"). Open the door of the tumble dryer. The spray jet is located in the top left of the door opening. You can only replace the spray jet using a special tool. The special tool is supplied with the new spray jet. Using the wrong tool can cause damage. Doing so can damage the spray jet or the tumble dryer. Only use the tool supplied. Do not use any other tool. The Steam Care program must never be used without the spray jet installed and screwed in correctly. Attach the tool to the spray jet. Turn the tool counterclockwise to unscrew the spray jet. Insert the new spray jet in the tool. Turn the tool clockwise to screw the spray jet securely in position. 67
![](/manual_guide/products/miele-txi-680-wp-eco-steam-operating-instructionsinstallation-instructions-7316ef7/67.png)