Miele TXI 680 WP Eco and Steam Operating instructions/Installation instruction - Page 57

Frequently Asked Questions, The display indicates messages or faults

Get Miele TXI 680 WP Eco and Steam PDF manuals and user guides View all Miele TXI 680 WP Eco and Steam manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Some of the messages in the display are more than one line long. Touch the  or  sensor button to read them in full. The display indicates messages or faults Message 000 lights up after switching on. End/Cooling down  Clean plinth filter. See  lights up at the end of a program. Possible cause and solution The PIN code is activated.  Enter the code and confirm the entry. Deactivate the PIN code if you do not wish this message to appear in the display the next time the machine is switched on. The laundry will be cooled down at the end of the program.  Either remove the laundry and spread it out to cool down or leave it in the tumble dryer to cool down during the cooling phase. The tumble dryer is not working correctly or economically. Possible causes could be clogging caused by lint or detergent residue.  Please see "Cleaning and care" for notes on clean- ing.  Clean the lint filters.  Also check the plinth filter and clean it if neces- sary.  To switch off the message: press OK. You can influence when the Clean plinth filter. See  message lights up.  To do this, follow the instructions in "Settings - Airway indicator". 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Frequently Asked Questions
57
With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department.
This guide may help you to find the reason for the fault, and how to correct it.
Some of the messages in the display are more than one line long. Touch the
or
sensor button to read them in full.
The display indicates messages or faults
Message
Possible cause and solution
000
lights up after
switching on.
The PIN code is activated.
Enter the code and confirm the entry. Deactivate
the PIN code if you do not wish this message to
appear in the display the next time the machine is
switched on.
End/Cooling down
The laundry will be cooled down at the end of the
program.
Either remove the laundry and spread it out to cool
down or leave it in the tumble dryer to cool down
during the cooling phase.
Clean plinth filter.
See 
lights up
at the end of a
program.
The tumble dryer is not working correctly or econom-
ically. Possible causes could be clogging caused by
lint or detergent residue.
Please see “Cleaning and care” for notes on clean-
ing.
Clean the lint filters.
Also check the plinth filter and clean it if neces-
sary.
To switch off the message: press
OK
.
You can influence when the
Clean plinth filter. See 
message lights up.
To do this, follow the instructions in “Settings –
Airway indicator”.