Miele TXI 680 WP Eco and Steam Operating instructions/Installation instruction - Page 66
Cleaning the lint filter in the condensed water container
![]() |
View all Miele TXI 680 WP Eco and Steam manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Frequently Asked Questions Cleaning the lint filter in the condensed water container In some circumstances, there can be problems running the Steam Care program. The lint filter at the end of the hose which is connected to the rubber seal in the condensed water container could be blocked. Remove the condensed water container. Guide the end of the hose through the opening and hold it securely with one hand. Use your other hand to pull the lint filter off the hose. Rinse the lint filter with a jet of water until all the lint has been removed. Refit the cleaned lint filter onto the hose. Now feed the hose with its lint filter attached into the condensed water container. Refit the spout in the condensed water container ensuring that it is positioned correctly. Please refer to the image. Pull out the spout. Remove the spout by holding the side lug and pulling upwards. To avoid detaching the hose, be careful not to tug on it. 66
![](/manual_guide/products/miele-txi-680-wp-eco-steam-operating-instructionsinstallation-instructions-7316ef7/66.png)