Miele TXI 680 WP Eco and Steam Operating instructions/Installation instruction - Page 81

Changing the door hinging, Changing the hinging over, 1. Remove the door from the tumble dryer

Get Miele TXI 680 WP Eco and Steam PDF manuals and user guides View all Miele TXI 680 WP Eco and Steam manuals
Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

*INSTALLATION* Installation Changing the door hinging You can change the door hinging on this tumble dryer yourself.  Hold the door securely and pull it forwards: to remove the door you will need to pull the base plate of the hinge with its 2 pins out of the dryer. For safety reasons, the tumble dryer must be disconnected from the electricity supply before changing the door hinging. You will need: - a Torx T20 and T30 screwdriver - a flat head screwdriver or pointed pliers - the lock catch cover supplied - the door hinge cover supplied - a soft surface (e.g., a blanket)  To avoid scratching the door, place it outer side downwards on a soft surface (e.g., a blanket). 2. Change over the door lock on the dryer  Use a Torx T30 screwdriver to unscrew the two screws on the door lock . Changing the hinging over 1. Remove the door from the tumble dryer  Open the door.  Use the screwdriver to press the door lock upwards. The door lock will spring out of its position and can then be removed.  Use a T30 Torx screwdriver to unscrew the two screws on the base plate of the door hinge . The door cannot fall off. 81

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Installation
81
Changing the door hinging
You can change the door hinging on
this tumble dryer yourself.
For safety reasons, the tumble dryer
must be disconnected from the elec-
tricity supply before changing the
door hinging.
You will need:
-
a Torx T20 and T30 screwdriver
-
a flat head screwdriver or pointed pli-
ers
-
the lock catch cover supplied
-
the door hinge cover supplied
-
a soft surface (e.g., a blanket)
Changing the hinging over
1. Remove the door from the tumble
dryer
Open the door.
Use a T30 Torx screwdriver to un-
screw the two screws on the base
plate of the door hinge
.
The door cannot fall off.
Hold the door securely and pull it for-
wards: to remove the door you will
need to pull the base plate of the
hinge with its 2 pins out of the dryer.
To avoid scratching the door,
place it outer side downwards on a
soft surface (e.g., a blanket).
2. Change over the door lock on the
dryer
Use a Torx T30 screwdriver to un-
screw the two screws on the door
lock
.
Use the screwdriver to press the door
lock upwards.
The door lock will spring out of its posi-
tion and can then be removed.