Motorola 49901 Instruction Manual - Page 24

Features and Functionality Features and Functionality Introduction This section describes the features available with your Vanguard 340 and 340 Enhanced device. For descriptions of the software running on your Vanguard, refer to the appropriate protocol document. These documents can be found on the VanguardMS Web site: http://www.vanguardms/support/documentation/ Vanguard 340 and The table below lists the different features for each product. 340 Enhanced Comparison Chart Product Name 340 LAN Ports 1 Voice Ports 1 to 8 340 1 1 to 6 Enhanced Processor MPC860T 9kpps MPC860P 13.5kpps SDRAM (MB) 16 FLASH (MB) 4/4 Encryption Compression Power Supply DCC DCC 50 Watts 32 8/8 ECC Software 35 Watts Standard Features on the 340 The standard Vanguard 340 provides these features: • Low Profile enclosure with rear accessible motherboard, and support for two Vanguard Daughtercards • 50 Mhz MPC860T PowerPC processor • 4 Megabytes of Non-Volatile FLASH on board • 4 to 8 Megabytes FLASH SIMM (optional) • 16 Megabytes of SDRAM DIMM (expandable to 32 Megabytes - optional) • Standard rear panel ports include: - Two daughtercard ports - One serial interface DB25 port supporting V.24, V.35, V.36, V.11/X.21 interfaces - One Async (RJ-45 connector) Control Terminal Port (CTP) for local and remote configuration, and management - One 10/100BaseT Ethernet port with auto-sensing - Up to Eight Voice Ports • Data Compression and Encryption SIMM slot (optional) • External power supply 62945-01 (APS Model APS61ES-30) 1-4 About the Vanguard 340 and 340 Enhanced