Motorola 49901 Instruction Manual - Page 67
Setting the Interface Type, Introduction, Interface Type, Parameter, Con gt; Port
UPC - 786523499018
View all Motorola 49901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Configuring the Serial Interface Setting the Interface Type Introduction This section provides instructions for setting the Interface Type parameter. Interface Type Parameter Use this procedure to set the Interface Type parameter: Step 1 2 3 4 5 Action From the Control Terminal Port Main menu, select Configure -> Port. In the Port Number parameter, type 3, then press ENTER. In the Port Type parameter, type FRI, then press ENTER In the Interfaced Type, type a ?, and then press ENTER. Select an Interface Type from the menu and press ENTER. Result/Description The Port record appears. Port 3 is selected. This defines Port 3 type as FRI. The Range and Default appear: Range = V.24, V.35, V.36, X.21, NONE Default = V.24 Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - V.11 Electrical Interface Type NONE - Electrically disabled The Interface Type is set. Installation and Replacement 3-9