Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 106

Managed Switch CLI Manual, Release 8.0.3 Tokens Definition supp-timeout server-timeout The value, in seconds, of the timer used by the authenticator state machine on this port to timeout the supplicant. The supp-timeout must be a value in the range 1 - 65535. The value, in seconds, of the timer used by the authenticator state machine on this port to timeout the authentication server. The supp-timeout must be a value in the range 1 65535. Default Format Mode • guest-vlan-period: 90 seconds • reauth-period: 3600 seconds • quiet-period: 60 seconds • tx-period: 30 seconds • supp-timeout: 30 seconds • server-timeout: 30 seconds dot1x timeout {{guest-vlan-period } |{reauth-period } | {quiet-period } | {tx-period } | {supp-timeout } | {server-timeout }} Interface Config no dot1x timeout This command sets the value, in seconds, of the timer used by the authenticator state machine on this port to the default values. Depending on the token used, the corresponding default values are set. Format Mode no dot1x timeout {guest-vlan-period | reauth-period | quiet-period | tx-period | supp-timeout | server-timeout} Interface Config dot1x unauthenticated-vlan Use this command to configure the unauthenticated VLAN associated with that port. The unauthenticated VLAN ID can be a valid VLAN ID from 0-Maximum supported VLAN ID (4093 for 7000 series). The unauthenticated VLAN must be statically configured in the VLAN database to be operational. By default, the unauthenticated VLAN is 0, i.e. invalid and not operational. Switching Commands v1.0, July 2010 3-70