Netgear GSM7228PS 7300 Series Managed Switch CLI Refernce Manual for Software - Page 625

Managed Switch CLI Manual, Release 8.0.3 Field Description Poller Data Source Receiver Index Poller Interval The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical ports only. The sFlowReceiver associated with this sFlow counter poller. The number of seconds between successive samples of the counters associated with this data source. show sflow receivers Use this command to display configuration information related to the sFlow receivers. Format Mode show sflow receivers [] Privileged EXEC Field Description Receiver Index Owner String Time Out Max Datagram Size The sFlow Receiver associated with the sampler/poller. The identity string for receiver, the entity making use of this sFlowRcvrTable entry. The time (in seconds) remaining before the receiver is released and stops sending samples to sFlow receiver. The maximum number of bytes that can be sent in a single sFlow datagram. Port IP Address Address Type Datagram Version The destination Layer4 UDP port for sFlow datagrams. The sFlow receiver IP address. The sFlow receiver IP address type. For an IPv4 address, the value is 1 and for an IPv6 address, the value is 2. The sFlow protocol version to be used while sending samples to sFlow receiver. Example: The following shows example CLI display output for the command. (switch) #show sflow receivers 1 Receiver Index 1 Owner String Time out 0 IP Address 0.0.0.0 Address Type 1 Port 6343 Utility Commands v1.0, July 2010 9-88